Your browser does not support JavaScript!
校  長

 

學歷:
國立成功大學電機工程博士 (1987.09 ~ 1992.05
國立成功大學電機工程碩士 (1985.09 ~ 1987.06
國立彰化師範大學工教系電機組學士 (1976.09 ~ 1980.06)
 
 
經歷:
國立彰化師大附工校長 (2010.08 ~
國立彰化師範大學電機系主任 (2007.08 ~ 2010.07)
國立彰化師範大學電機系教授 (2004.08)
國立彰化師範大學電機系副教授 (1998.08 ~ 2004.07)
國立彰化師範大學工教系副教授 (1994.08 ~ 1998.07)
空軍航空技術學校副教授 (1992.08 ~ 1994.07)
私立遠東工專講師 (1987.08 ~ 1992.07)
台北市立南港高工電器冷凍修護科教師 (1983.08 ~ 1985.07)
省立秀水高工電工科教師 (1982.08 ~ 1983.07)
 
專長:
數位影像處理
機械視覺
自動控制
 
 
研究成果:

A. 期刊論文

1. C. W. Wu, H. W. Li, S. H. Yen, and Y. S. Shiao, “Design and Implementation of an Image-based Fuzzy Logic Controller for a Wheeled Mobile Robot,” International Journal of Control Theory and Applications, Issue 2, December 2009.

2. J. L. Yang, D. T. Su, Y. S. Shiao, and K. Y. Chang, “Path-tracking Controller Design and Implementation of a Vision-based Wheeled Mobile Robot,” Proc. IMechE, Part I: Journal of Systems and Control Engineering, 2009, 223 (6), 847-862.

3. Y. S. Shiao, J. L. Yang, and D. T. Su, “Path Tracking Laws and Implementation of a Vision-Based Wheeled Mobile Robot,” Journal of WSEAS Transactions on Circuits and Systems, Issue 12, Vol. 7, December 2008, pp. 965-976.

4. J. L. Yang, D. T. Su, and Y. S. Shiao, “Research on MPPT and Single-Stage Grid-Connected for Photovoltaic System,” Journal of WSEAS Transactions on Systems, Issue 10, Vol. 7, October 2008, pp. 1117-1131.

5. Y. S. Shiao, D. T. Su, J. L. Yang, and R. W. Hung, “Electrochemistry Theorem Based on State-of-Charge Estimation of the Lead Acid Batteries for Electric Vehicles,” Journal of WSEAS Transactions on Electronics, Issue 6, Vol. 5, October 2008, pp. 196-207.

6. D. T. Su, Y. S. Shiao, and J. L. Yang, “Design and Implementation of a Chassis Dynamometer for Testing BPMs,” Journal of WSEAS Transactions on Circuits & Systems, Issue 10, Vol. 7, October 2008, pp. 879-889.

7. J. L. Yang, D. T. Su, and Y. S. Shiao, “Research on MPPT and Single-Stage Grid-Connected for Photovoltaic System,” Journal of WSEAS Transactions on Systems, Issue 10, Vol. 7, October 2008, pp. 1117-1131.

8. W. R. Yang, Y. S. Shiao, D. T. Su, and C. S. Wang, “Design and Implementation of Fuzzy Controllers for Auto Focus, Auto Exposure and Zoom Tracking,” Tamkang Journal of Science and Engineering, Vol. 11, No. 3, September 2008, pp. 305-312.

9. C. E. Lin, Y. S. Shiao, C. C. Li, and S. H. Lin, “Real Time Remote On-Board Diagnostics using Embedded GPRS Surveillance Technology,” IEEE Trans. on Vehicular Technology, Vol. 56, Issue 3, May 2007, pp. 1108-1118.

10.R. W. Huang and Y. S. Shiao, “Estimation of State-of-Charge of Lead-Acid Batteries Based on Electrochemistry Theorem,” JSME International Journal, Vol. 49, No. 1, March 2006, pp. 265~271.

11. Y. S. Shiao and Y. H. Chen, “Human-Computer Interface Design for Chinese Chess: The Application of Backpropagation Network for Recognizing Chinese Chess Patterns,” Journal of Industrial Education, Vol. 28, Jun. 2005, pp. 151~166.

12.R. W. Huang and Y. S. Shiao, “Design and Implementation of Vehicle Electric Power Management System Using Controller Area Network,” Journal of Vehicle Engineering, Vol. 1, May 2004, pp 76-90.

13.Y. S. Shiao and Y. L. Chen, ”Design and Implementation of Regenerative Braking Controller for Battery-Powered Motorcycles,” Journal of Industrial Education, Vol. 27, July. 2003, pp. 65~72.

14.Y. S. Shiao and C. K. Yang, “A Controller Design and Implementation of Ball on Beam System with Image Servo,” Journal of Industrial Education, Vol. 26, July. 2002, pp.85~92.

15.Y. S. Shiao, “Controller Design and Implementation of Magnetic Levitation System,” Proceedings of the National Science Council, Part D: Mathematics, Science, and Technology Education, Vol. 11, No. 2, May 2001, pp. 88-94.

16.Y. S. Shiao, Design and Implementation of Real-Time Tracking System Based on Vision Servo Control, Tamkang Journal of Science and Engineering, Vol. 4, No. 1, March 2001, pp. 45-58.

17.Y. S. Shiao, “Controller Design and implementation of Ball on Bean System,” Jounal of Industrial Education, Vol. 25, June 2001, pp. 91-100.

18.Y. S. Shiao, R. Y. Lin, T. M. Chien and M. C. Su, “Design and Implementation of Real Time Vision Tracking System,” Jounal of Industrial Education, Vol. 24, October 2000, pp.71-80.

19.Y. S. Shiao, ''A Microcomputer-Based Speed Controller for DC Motor," Journal of Inductrial Education, Vol. 23, June 1999, pp. 35-46.

20.C. E. Lin, Y. S. Shiao, C. L. Huang and P. S. Sung, ”A Real and Reactive Power Control Approach for Battery Energy Storage System,” IEEE Trans on Power System, Vol. 7, No. 3, August 1992, pp. 1132-1140.

21.C. E. Lin, Y. S. Shiao, C. L. Huang and P. S. Sung, ”Design Consideration and Economical Evaluation for Battery Energy Storage System,” IEEE Power Engineering Society Summer Meeting, July 12-16, 1992, Seattle, WA.

22.Y. S. Shiao, C. E. Lin, M. T. Tsai and C. L. Huang, ”A Harmonic and Reactive Current Compensation Using Voltage Source Inverter In Battery Energy Storage System,” International Journal on Electric Power System Research, Vol. 25, 1992, pp. 25-33.

B. 研討會論文

1. J. R. Wu, H. W. Li, S. H. Yen, T. P. Lin, and Y. S. Shiao, “Design and Implementation of Visual Servo Controller for Robot Grasping System,” the 23rd IPPR Conference on Computer Vision, Graphics, and Image Processing (CVGIP-2010), Kaohsiung, Taiwan, August 15-17, 2010.

2. E. S. Chang, S. H. Yen, H. W. Li, S. J. Suen, and Y. S. Shiao, “A Face Recognition Method Based on Binocular Visions,” the 23rd IPPR Conference on Computer Vision, Graphics, and Image Processing (CVGIP-2010), Kaohsiung, Taiwan, August 15-17, 2010.

3. J. R. Wu, H. W. Li, S. H. Yen, T. P. Lin, and Y. S. Shiao, “Design and Implementation of Visual Servo Controller for Robot Grasping System,” the 23rd IPPR Conference on Computer Vision, Graphics, and Image Processing (CVGIP-2010), Kaohsiung, Taiwan, August 15-17, 2010.

4. Y. S. Shiao, J. L. Yang, and D. T. Su, “Development of a Sliding Control Maximum Power Point Tracker for Photovoltaic,” Proceedings of the 8nd WSEAS International Conference on Systems Theory and Scientific Computation, ISTASC’08, August 2008, pp. 217-222

5. Y. S. Shiao, J. L. Yang, and D. T. Su, “Optimal Nonlinear Predictive Visual Servoing of a Wheeled Mobile Robot,” Proceedings of the 8nd WSEAS International Conference on Systems Theory and Scientific Computation, ISTASC’08, August 2008, pp. 198-203.

6. J. L. Yang, D. T. Su, and Y. S. Shiao, “Vision-Based Predictive Path Tracking Control of a Wheeled Mobile Robot,” IEEE 3rd International Conference on Innovative Computing Information and Control, ICICIC '08, June 2008, pp. 472- 475.

7. J. L. Yang, D. T. Su, and Y. S. Shiao, “Vision-Based Predictive Path Tracking Control of a Wheeled Mobile Robot,” IEEE 3rd International Conference on Innovative Computing Information and Control, ICICIC '08, June 2008, pp. 472- 475.

8. D. T. Su, J. L. Yang, and Y. S. Shiao, “A DSP-Based Active Power Filter Rooted on Energy Balance Concept,” IEEE 3rd International Conference on Innovative Computing Information and Control, ICICIC '08, June 2008, pp. 481-484.

9. Y. S. Shiao, J. L. Yang, and D. T. Su, “Optimal Nonlinear Predictive Visual Servoing of a Wheeled Mobile Robot,” Proceedings of the 8nd WSEAS International Conference on Systems Theory and Scientific Computation, ISTASC’08, August 2008, pp. 198-203.

10.Y. S. Shiao, J. L. Yang, and D. T. Su, “Development of a Sliding Control Maximum Power Point Tracker for Photovoltaic,” Proceedings of the 8nd WSEAS International Conference on Systems Theory and Scientific Computation, ISTASC’08, August 2008, pp. 217-222.

11.Y. S. Shiao, D. T. Su, C. T. Ko, and R. W Hung, “Techniques for Estimating the State-of-Charge of Lead Acid Batteries in Electric Vehicles,” Proceedings of the 8nd WSEAS International Conference on Systems Theory and Scientific Computation, ISTASC’08, August 2008, pp. 270-275.

12.D. T. Su, Y. S. Shiao, and J. L. Yang, “Design and Implementation of the Performance Test System for Battery-Powered Motorcycles,” Proceedings of the 8nd WSEAS International Conference on Systems Theory and Scientific Computation, ISTASC’08, August 2008, pp. 264-269.

13.H. C. Sun, H. W. Li, Y. S. Shiao, and S. H. Yen, “Design and Implementation of an Active Camera Motion Controller for Multiple Objects Recognition and Tracking, The 21th Computer Vision, Graphics and Image Processing Conference, 24-25 August 2008.

14.C. C. Li, Y. S. Shiao, and C. E. Lin, “Data Acquistion and Wirelless Monitoring for Post-Processsor in Diesel Vehicles,” IEEE Intelligent Vehicles Symposium, June 4-6, 2008, Eindhoven University of Technology, Eindhoven, The Netherlands.

15.Y. S. Shiao and D. T. Su, “A Vector Controller Based on DSP for Wind Power Inverter-Excited Induction Generator,” IEEE Second International Conference on Innovative Computing, Information and Control, ICICIC '07, September 2007, pp. 97-100.

16.C. W. Wu, S. H.Yen, Y. S. Shiao, and H. W. Li, “Path Planning and Obstacle Avoidance Based on Stereo Vision for Autonomous Cart,” The 21th Computer Vision, Graphics and Image Processing Conference, 24-25 August 2008.

17.Y. S. Shiao, D. T. Su, and R. W. Hung, “Estimating the Residual Range of Motorcycles Powered by Lead Acid Batteries,” IEEE International Conference on Intelligent & Advanced Systems, Kuala Lumpur, Malaysia, November 2007.

18.Y. S. Shiao, D. T. Su, and R. W. Huang, “Estimating the Residual Range of Motorcycles Powered by Lead Acid Batteries,” International Conference on Intelligent & Adcanced Systems, KL Convention Centre, Kuala Lumpur, Malasia, 25-28 November 2007.

19.Y. S. Shiao, H. W. Li, and T. P. Lin, “Visual Servo Control of Robots with End-Effector Mounted Binocular Cameras,” The 20th Computer Vision, Graphics and Image Processing Conference, 19-21 August 2007, pp. 948-954.

20.T. K. Chan and Y. S. Shiao, “Design and Implementation of Fuzzy Controlled Photovoltaic Charger,” The 1st Taiwan Green Eneregy and New Product Conference, 9 June 2007, pp. 23-29.

21.C. D. Tseng, Y. S. Shiao, and C. C. Chen, “Study of Megnetic Field Distributions in a Magnetic Ball Suspension System,” 1st Taiwan Green Eneregy and New Product Conference, 9 June 2007, pp. 58-64.

22.S. Y. Yang and Y. S. Shiao, “The Study of Regenerative Braking System by Using Ultracapacitors,” 1st Taiwan Green Eneregy and New Product Conference, 9 June 2007, pp. 96-100.

23.C. T. Ko, Y. S. Shiao, and M. C. Hung, “Application of Energy Conservation Building Technology of Regenerating Energy System,” 1st Taiwan Green Eneregy and New Product Conference, 9 June 2007, pp. 101-107.

24.Y. H. Hsieh, Y. S. Shiao, and T. R. Chen, “The Study of Using Integrator for Suppressing Zero Point Drift in the Direct Coupling Amplifier,” 1st Taiwan Green Eneregy and New Product Conference, 9 June 2007, pp. 123-127.

25.J. H. Chang, Y. S. Shiao, and H. P. Chang, “Research of Automatic Equipment for Making Flour Dough,” 1st Taiwan Green Eneregy and New Product Conference, 9 June 2007.

26.C. M. Li and Y. S. Shiao, “Design and Implementation of Vision Servo Controller for Magnetic Levitation System,” 1st Taiwan Green Eneregy and New Product Conference, 9 June 2007, pp. 231-234

27.Y. S. Shiao, M. C. Hung, J. L. Yang, and C. T. Ko, “Design and Implementation of a Sliding Mode Maximum Power Point Tracking Controller for Photovoltaic System,” The 6th Taiwan Power Electronics Conference and Exhibition, 7 September 2007, pp. 181-187.

28.Y. S. Shiao, R. J. Huang, and D. T. Su, “Design and Implementation of State-of-Charge Measurement System for Battery-Powered Motorcycles,” The 6th Taiwan Power Electronics Conference and Exhibition, 7 September 2007, pp. 327-338.

29.Y. S. Shiao, D. T. Su, and R. J. Huang, “Design and Implementation of a Regenerative Braking Controller for Battery Powered Motorcycles,” The 6th Taiwan Power Electronics Conference and Exhibition, 7 September 2007, pp. 699-705.

30.C. C. Hou, Y. H. Hsieh, Y. S. Shiao, and T. R. Chen, “The Study of Copier Controller by Using USB Interface,” The 2nd Taiwan Green Eneregy and New Product Conference, 1 December 2007, pp. 1-5.

31.C. J. Hsiao, C. S. Wang, and Y. S. Shiao, “Improvement of Automated Aluminum Material Storage,” The 2nd Taiwan Green Eneregy and New Product Conference, 1 December 2007, pp. 23-28.

32.C. S. Lu, C. F. Chang, W. R. Yang, and Y. S. Shiao, “The Study of Electro-Magnetic Interference to CNC Machine,” The 2nd Taiwan Green Eneregy and New Product Conference, 1 December 2007, pp. 89-95.

33.K. S. Ma, Y. S. Shiao, and T. R. Chen, “Study of Impulse Noise Suppression,” The 2nd Taiwan Green Eneregy and New Product Conference, 1 December 2007, pp. 102-106.

34.K. H. Chiu, Y. S. Shiao, and H. P. Chang, “Study of Light Emitting Diodes for the Headlight Illumination, The 2nd Taiwan Green Eneregy and New Product Conference, 1 December 2007, pp. 107-111.

35.Y. S. Shiao, D. T. Su, and Y. S. Wong, “Design and Implementation of the Performance Test System for Battery Powered Motorcycle,” The 27th Symposium on Electrical Power Engineering, December 22-23, 2006, pp. PE2.14.1-PE2.14.5.

36.Y. S. Shiao, Y. S. Wong, D. T. Su, and F. Chen, “Design and Implementation of an Inverter-Excited Vector Controller for Standalone Induction Generator,” The 27th Symposium on Electrical Power Engineering, December 22-23, 2006, pp. OF3.6.1-OF3.6.5.

37.Y. S. Shiao, C. R. Chen, F. K. Shih, and W. L. Liou, ”Active Camera Control Algorithms for Tracking High-Speed Targets Moving at Fixed Trajectory,” The 19th IPPR Conference on Computer Vision, Graphics and Image Processing, August 13-15, 2006, pp. 1017-1023.

38.Y. S. Shiao, J. J. Chen, Y. H. Chen, and J. L. Yang, “Land and Obstacle Detection Based on Stereo Vision for Autonomous Guided Cart,” The 19th IPPR Conference on Computer Vision, Graphics and Image Processing, August 13-15, 2006, pp. 1201-1207.

39.Y. S. Shiao and D. T. Su, “Design and Implementation of State-of-Charge Measurement System for Lead Acid Battery,” 2006 Taiwan Power Electronics Conference, September 8-9, 2006, pp. 950-958.

40.Y. S. Shiao, Y. S. Wong, and D. T. Su, “Design and Implementation of Energy Index Test System for Battery-Powered Motorcycle, 2006 Taiwan Power Electronics Conference, September 8-9, 2006, pp. 1225-1229.

41.Y. S. Shiao and Y. H. Cheng, “Control Simulations and Experiments of Two-axes Parallel Manipulator,” 2006 Taiwan Power Electronics Conference, September 8-9, 2006, pp. 1304-1309.

42.Y. S. Shiao and Y. H. Cheng, “Obstacle Detection for Autonomous Guide Vehicle,” 2006 Intelligent Living Technology, ICS_R01. June 9, 2006.

43.Y. S. Shiao and Y. H. Cheng, “Coordinating Locomotion and Manipilation of a Wheel Mobile Robot,” 2006 Intelligent Living Technology, ICS_R02. June 9, 2006.

44.Y. S. Shiao and Y. H. Cheng, “Lane Detection for Autonomous Guided Vehicle,” 2006 Intelligent Living Technology, ICS_P04. June 9, 2006.

45.Y. S. Shiao, R. W. Huang, Y. H. Chen, and I. P. Chang, “Design and Implementation of an Image Servo Controller for a Ball-on-Beam System,” 2005 CACS Automatic Control Conference, November 18-19, 2005.

46.Y. S. Shiao, J. J. Chen, C. M. Huang and D. T. Su, “A Vector Controller Based on DSP for Inverter-Excited Induction Generator,” The 25th Symposium on Electrical Power Engineering, December 9-10, 2005, pp. 2042-2046.

47.Y. S. Shiao and Y. H. Chen, ”Design and Implementation of Parallel Manipulator for Active Binocular Cameras,” Proceedings of the Eighth National Conference on the Design of Mechanisms and Machines, December 2, 2005, pp. 585-590.

48.Y. S. Shiao, T. R. Chen, Y. H. Chen, and Y. L. Lee, “The Calibrations of a Spherical Parallel Manipulator for Active Camera,” The 18th IPPR Conference on Computer Vision, Graphics and Image Processing, August 23, 2005, pp. 1731-1739.

49.Y. S. Shiao, T. R. Chen, I. P. Chang, and F. P. Chuo “The Tracking Algorithms for Active Camera Oriented by a Spherical Parallel Manipulator,” The 18th IPPR Conference on Computer Vision, Graphics and Image Processing, August 23, 2005, pp. 1791-1797.

50.Y. S. Shiao and T. K. Lai, “An Simulation Study on Active Motion Control Based on a Parallel Architecture Using Three Independent Actuators,” 2004 CACS Automatic Control Conference, March 26-27, E04-07.

51.Y. S. Shiao and Y. F. Su, “Design and Implementation of a Tracking Controller with Image Vision Servo for Active Camera,” The 17th Conference of Computer Vision, Graphics, & Image Processing, August 15-17, 2004, A3-7.

52.黃榮文、蕭瑛星、洪國雄、陳予柔,”使用控制區域網路之汽車電系監控系統”,2004自動控制研討會,大葉大學。

53.Y. S. Shiao, J. B. Wei, W. J. Huang, May 2003,“E-Automation in Web-Based Virtual Environments,”The Seventh International Conference on Automation technology. (Paper ID:I107)

54.Y. S. Shiao and Y. L. Chen, “Vector Controller Design and Implementation of Induction Generator for Aircraft VSCF System,” The 24th Symposium on Electrical Power Engineering, December 2003, pp. 1819-1823.

55.Y. S. Shiao, C. K. Yang and Y. L. Chen, “Regenerative Braking Contorller Design and Implementation of BLDC Motor for Battery-Powered Motorcycles,” 2003 Taiwan Power Electronics Conference, September 2003, pp. 754- 757.

56.Y. S. Shiao, Y. L. Chen, R. W. Huang and C. H. Huang, “Design and Implementation of a Bidirectional Converter for Battery-powered Motorcycles,” The 23rd Symposium on Electrical Power Engineering, December 2002, Taiwan, pp. 1194~1199.

57.Y. S. Shiao, J. B. Wei, C. K. Yang and J. S. Lin, “A Controller Design and Implementation of Chassis Dynamometer for Battery-Powered Motorcycles,” The 23rd Symposium on Electrical Power Engineering, December 2002, Taiwan, pp.1200~1204.

58.Y. C. Chang, T. R. Chen, T. C. Chen, Y. S. Shiao and J. F. Liu, “Analysis of Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) for PCB,” The 23rd Symposium on Electrical Power Engineering, December 2002, Taiwan, pp. 174~178.

59.Y. S. Shiao, W. J. Huang, C. L. Huang and J. B. Wei, “To Minimize PLC Downtime by Detecting Machine Faults,” 2002 Conference on Industrial Automatic Control & Power Application, December 2002, Taiwan, D1-30~34.

60.C. L. Huang, Y. S. Shiao, W. J. Huang and J. B. Wei, “Study of Network Technique and Fuzzy Control Applied in an Automatic Aquarium System,” 2002 Conference on Industrial Automatic Control & Power Application, December 2002, Taiwan, E2-14~18.

61.S. H. Huang, T. R. Chen, T. C. Chen, Y. S. Shiao and H. S. Chang, “Implementation of Charger with Microprocessor Based for SLA Batteries,” Proceedingsof 2002 Taiwan Power Electronics Conference, November 2002, pp. 178-183.

62.J. F. Liu, T. R. Chen, T. C. Chen, Y. S. Shiao and P. Y. Huang, “Implementation of Charger for Li-ion Battery,” Proceedingsof 2002 Taiwan Power Electronics Conference, November 2002, pp. 184-188.

63.Y. S. Shiao and C. W. Wang, “Control and Operation Study of Induction Generator in Variable Speed Constant Frequency for Load Management,” The 21th Symposinm on Electrical Power Engineering, November 2001. Taiwan.

64.蕭瑛星, “應用再生發電技術於電動機車之動能回收控制器設計及製作,” 中華民國第三屆機車交通與安全研討會,2001年3月,頁337-390.

65.Y. S. Shiao and M. C. Fu, “The Application of Image Processing and Back Propagation Network for Recongnizing Chinese Chessmen,” CVGIP2001, paper 069.

66.蕭瑛星, “航空器感應發電變速定頻系統的向量控制器研製,” 第十屆國防科技學術研討會論文集, 2001年11月, 頁2-130~2-136.

67.Y. S. Shiao, C. C. Luo, C. H. Huang and C. W. wang, “Design and Implementation of a Chassis Dynamometer for Battery-Electric Motorcycles,“ The 21th Symposium on Electrical Power Engineering, November 18-19, 2000, pp. 978-983, Taipei, Taiwan.

68.Y. S. Shiao, “Design and Implementation of Real Time Vision Tracking System,” Proceedings of the Fifth Symposium on Computer & Communication Technology, 2000, Chung-hua, Taiwan, pp. 2p11~2p15.

69.蕭瑛星, “應用到傳遞類神經網路於象棋棋子之辨識,” 第十二屆全國自動化科技研討會, 2001, 5月25-26日, pp. 123~133.

70.Y. S. Shiao, C. H. Hung, Y. C. Jeng and C. W. Wang, “The Propulsion Analysis and Regenerative Braking Controller Design and Implement for Battery-Electric Motorcycles," The 20th Symposinm on Electrical Power Engineering, November 20-21, 1999. pp. 451-456. Taipei, Taiwan.

71.Y. S. Shiao and C. E. Lin, ”A Prototype Induction Generator VSCF System for Aircraft,” IEEE Conference on Industrial Automation and Control, May 22-24, 1995, pp. 148-155, Taipei, Taiwan.

72.H. H. Chen and Y. S. Shiao, ”An Induction Generator Variable Speed Constant Frequency System for Aircraft Application, 第一屆三軍官校基礎學術研討會, 1993, Taiwan.

73.C. L. Huang, C. E. Lin and Y. S. Shiao, ”Economical Evaluation of Load Side Battery Energy Storage System for Load Management,” The 12th Symposium on Electrical Engineering, December 20-21, 1991, Taiwan.

74.C. E. Lin, M.T. Tsai, Y. S. Shiao, and C. L. Huang, “An Active Filter for Reactive and Harmonic Compensation Using Voltage Source Inverter,” 1991 International Conference on Advances in Power System Control, Operation and Management, APSCOM-91, vol.2, 5-8 Nov 1991 pp. 588 – 593.

75.C. E. Lin, M. T. Tsai, Y. S. Shiao and C. L. Huang, ”An Active Filter Reactive and Harmonics Compensation Using Voltage Source Inverter,” IEE APSCOM, November 5-8, 1991, Hong Kong.

76.C. L. Huang, C. E. Lin , Y. S. Shiao, M. T. Tsai P. S. Sung and C. C. Miao,”A real and Reactive Power Control Method of Battery Energy Storage System for Load Management,” The 11th Symposium on Electrical Engineering, December 22, 1990, Taiwan.

77.C. L. Huang, C. E. Lin, M. T. Tsai and Y. S. Shiao, ”An Active Filter Using Voltage Source Inverter,” The 11th Symposium on Electrical Power Engineering, December 22, 1990, Taiwan.

78.C. E. Lin, Y. S. Shiao, and C. L. Huang, ”A Harmonic and Reactive Current Compensaion Using Voltage Source Inverter in Battery Energy Storage System,” International Symposium on Energy Conversion in Power System, Capri, Italy, May 25-27, 1989.

79.C. L. Huang, C. E. Lin, W. C. Lin and Y. S. Shiao, ”Application of Microcomputer Based Transient Monitor System on Switching Surge Study,” The 7th Symposium on Electrical Power Engineering, December 20-21, 1986, Taiwan.

80.C. L. Huang, S. S. Yen, H. Y. Chu, M. T. Chen and Y. S. Shiao, ”Impact of Harmonics on Capacitors in Industrial Distribution System, ”The 6th Symposium on Electrical Power Engineering, December 21, 1985, Taiwan.

C. 專利

1. 蕭瑛星,一種電動機車動態測試平台裝置,中華民國專利證書發明第一四一七五二號中華民國專利公報[19][12],公告編號:452647

2. 蕭瑛星,一種三軸獨立平行運動的攝影機控制機構及控制方法,中華民國專利證書發明第I 235277號。

3. 王朝興,蕭瑛星,陳永祥,一種雙軸平行運動的攝影機控制機構及控制方法,中華民國專利證書新型第M333731號。

4. 蕭瑛星,王朝興,蘇丁財,攝影機鏡頭自動對焦光圈及變焦的模糊控制裝置,申請案號:097127700。

D. 技術報告及其他

1. 蕭瑛星, “高智能智慧型機器人仿人運動控制、認知與學習之先導型課程開發與研究,” 教育部大學跨學門科學人才培育銜接計畫98A-1.

2. Y. S. Shiao, “Key Technology Study for Motor Driver and Servo Control Using Contactless Power System,” NSC 97-2221-E-018-031.

3. Y. S. Shiao, “Key Technology Study for Motor Driver and Servo Control Using Contactless Power System,” NSC 96-221-E-018-028.

4. Y. S. Shiao, “Human-Computer Interface Design for Chinese Chess: Design and Implementation of a Robotic Motion Controller with Image-Based Visual Servo,” NSC 94-2213-E-018-017.

5. Y. S. Shiao, “Human-Computer Interface Design for Chinese Chess: The Application of Backpropagation Network for Recognizing Chinese Chess Patterns,” NSC 93-2213-E018-004.

6. Y. S. Shiao, “Design and Implementation of Chassis Dynamometer and Battery Monitor for Battery-Powered Motorcycles (II),” NSC91-2213-E-019-003.

7. Y. S. Shiao, “Design and Implementation of Chassis Dynamometer and Battery Monitor System,” NSC 90-2213-E-018-008.

8. Y. S. Shiao, “Control and Operation Study of Induction Generator in Variable Speed Constant Frequency for Load Management,” NSC89-2213-E-018-005.

9. Y. S. Shiao, "The Propulsion Analysis, Regenerative Braking, Battery Monitor and Economical Benefits Evaluation for Battery-Electric Motorcycles,” NSC88-2212-E-018-004.

10.Y. S. Shiao, ”A Simulation Study of Self-excited Induction Generator with BESS for Load Management,” NSC87-2213-E-0018-0004.

11.Y. S. Shiao, ”Controller Design and Implement of Magnetic Levitation System,” NSC86-2515-S-0018-0001.

12.黃靖雄, 蕭瑛星, “台北市天然氣公車示範計劃期末報告,” 台北市政府交通局, 財團法人車輛研究測試中心, 86年8月.

13.Y. S. Shiao, “Vector Control of Aircraft Induction Generator VSCF System,” NSC84-2212-E-018-008.

14.Y. S. Shiao, ”Controller Design, Simulation and Experiments of Aircraft Induction Generator VSCF System,” NSC83-0404-E-0006-0002.

15.C. L. Huang, C. E. Lin and Y. S. Shiao, ”Application of Microcomputer Based on Switching Surge Study,” NSC75-0404-E-0006-0006.

16.C. L. Huang, C. E. Lin and Y. S. Shiao, ”An Experiment Battery Energy Storage System on Design, Simulation and Improvement,” TPC report, TPC project from june 1988 to November 1990.

17.C. L. Huang, C. E. Lin and Y. S. Shiao, ”Control System Design, Simulation and Experiments on Reactive Mode Inverter (II),” NSC79-0404-E-0006-0013.

18.C. E. Lin and Y. S. Shiao, ”Control System Design, Simulation and Experiments on Reactive Power Mode Inverter ( I ),” NSC78-0404-E-0006-0002.

19.C. L. Huang, C. E. Lin and Y. S. Shiao, “A New Algorithm for Short Circuit Current Calculation of Marine Power System,”NSC76-0404-E-0006-0002.

 

瀏覽數